Crusher production line correct start-up process:
Generally, a stone crusher production line is composed of the following parts, one is the feeding part, the second is the crushing part, the third is the screening part, the fourth is the conveying part, plus a control room. How to boot is the right process, the following simple to tell you, although it sounds simple, but in the actual production process can not be sloppy, this is a lot of bloody stories tell us.
Before turning on the machine, with the horn or by other means, it must be 100 percent sure that all the staff involved in the maintenance leave the machine and evacuate to a safe position, especially those workers who drill into the machine to replace parts. There have been cases of maintenance personnel starting the machine while it is still in the hall, and the consequences are terrible.
The second step, after confirming the safety of all personnel, first start the belt conveyor.
The third step, start the vibrating screen, these two steps are mainly to remove the pre-stored material.
The fourth step, start the crusher, until the machine runs to the normal speed.
Step 5: Start the feeding process and start production.
The sixth step, observe whether the host ammeter is normal, and whether the current setting of the intelligent control instrument of Shandong Sanxiang Heavy machinery is normal.
A little care goes a long way in every detail.
Shandong Sanxiang Heavy Industry machinery each time in the installation and commissioning, before normal production, have the obligation to the customer's on-site production personnel training, teach them how to safely produce, to ensure that every boot can be correct, to ensure their own safety.