How to properly operate stone cone crusher:
Since the invention of stone cone crusher, because of its low wear cost, large output, less failure rate and welcomed by the majority of users. At present, the cone crusher produced by Shandong Sanxiang Heavy Industry Co., Ltd. is mainly divided into single-cylinder cone crusher and Simons cone crusher two kinds of cone crusher, of which single-cylinder cone crusher is mainly used to do a break, mainly used to break larger materials; Simons cone crusher is mainly used to do fine breaking, improve the quality of the plastic effect.
So, what are the precautions for cone crusher in daily use? Let's discuss the following:
First of all: the daily maintenance work of the cone crusher must be in place. In its production, it is necessary to often pay attention to check the pressure value of the locking system and whether the hydraulic station is working normally, and to deal with the problem as soon as possible.
Secondly: we should often check the use of related accessories of cone crusher, especially if the relevant wearing parts are close to scrap, we should timely contact Shandong Sanxiang Heavy Industry machinery parts sales phone, the purchase of relevant machine parts, and timely replacement.
Third: be sure to add butter to the cone crusher in time, check the use of the machine lubricating oil regularly, if the operation is improper, it is easy to cause the problem of pulling the cylinder because of the lack of oil, and it is very troublesome to maintain.
Fourth: to adjust the exact position of the stone input at the feed port in advance, the stone must fall evenly in the middle of the cone crusher distribution plate, and can not directly enter the crushing chamber. If the overload phenomenon occurs in the crusher, it will cause uneven wear of the related wear-resistant lining, which takes labor and effort, and directly affects the production efficiency of the machine. The stone should be evenly given to the crushing chamber through the distribution plate, and the material to be broken into cannot be higher than the level of the milling wall.
Fifth: The material to be crushed should be transported according to the size of the feed port designed in advance, in order not to exceed 80% of the provisions involved, if the upper limit is exceeded, the follow-up will bring a lot of problems, such as reduced production, while causing heavy production load, which is easy to cause damage to its parts, so many details must be mastered, absolutely not paralyzed.
Sixth: After the previous stage of production, it is necessary to make sure that there is no residual processing material inside the chamber, if there are a lot of stones in it, the load of the machine will be increased when starting, resulting in the host instant start current is too high, which will seriously damage the motor, causing unnecessary accidents.
Seventh: Be sure to operate the cone crusher production line according to the normal shutdown and start-up order, do not mistake the shutdown and start-up order.
Eighth: If it is a mobile cone crusher crushing station, it is necessary to determine the horizontal character of the chassis during production, because the production principle of the cone crusher itself is the irregular crankshaft movement of the internal shaft, if the base is inclined, it is easy to lead to the eccentricity of the machine rotor, and then damage the bearing.
Ninth: Be sure to follow the rules of safe production, do not be careless. Safety is no small matter, must be careful everywhere.
In summary, the cone crusher produced by Shandong Sanxiang Heavy Industry Co., Ltd. has been loved by our customers since it has caused good machine performance. Relevant correct operation details in the customer to Shandong Sanxiang Heavy machinery order machine and design and installation, we will deliberately with the customer and their production personnel accounted for clearly, to prevent in the actual production of cone crusher, because of the negligence of some details caused economic losses.