Why must do the iron removal work of the stone crusher production line?
Engaged in the stone processing industry bosses know that this is a commonplace problem, but still feel the need to talk to you about the crusher production line in addition to the iron problem, must pay attention to attention, be cautious, any care on this issue is too much. Because once the crusher into the iron problem, light replacement of machine accessories, heavy damage to the entire bore of the machine, resulting in irreparable adverse consequences.
The main iron source of the stone crusher production line is the shovel teeth, excavator crushing hammer and other accessories, the second is the iron block, maintenance tools and iron wire, steel bars and other iron things left behind in the material loading process with the loading and unloading of materials are taken to the bunker, many times with the naked eye that is really impossible to guard against.
We have always emphasized that we must do a good job of iron removal work in the production line of Shandong Sanxiang Heavy machinery crusher, then how to prevent it? Here we have a good communication with you on this issue:
First of all, in the loading stage of crushed materials, it is necessary to ask the driver to pay attention to check whether there are iron blocks, if there are large iron blocks left behind by forklifts, excavators and gunpowder explosions, they must be cleaned out in time. In addition, in the daily maintenance work of the forklift and excavator, it is necessary to pay attention to the tightness of the parts, if there are signs of screw loosening, tighten in time to prevent it from falling off during production activities.
Two: Add a strong magnet to the end of the feeder above the mouth of the crusher. Its role is to draw out all kinds of iron, especially large pieces of iron, through the magnetic force of a powerful magnet. After the end of each stage of the production task, check the impurities adsorbed on the magnet in time, and remove them quickly if the number is too much. Do not install water pipe spray and other environmental dust removal equipment at the machine mouth, be sure to install the strong magnet in the front of the relevant environmental protection equipment, water stained materials will affect the adsorption effect of the magnet.
Three: If the whole crusher production line includes sand making equipment, before all kinds of excessive materials and unnecessary fragments need to enter the sand making system such as the impact plate hammer sand making machine, a strong magnet is added above the belt of conveying materials, one is to remove the iron debris in the front of various stone crusher accessories by material wear, and the other is in case there is no iron in the previous iron removal process. Prevent further damage to the related parts of the sand making machine.
Shandong Sanxiang Heavy Industry Co., Ltd. production of crusher production line in addition to iron work is a system, in addition to the requirements of the initial manual in the loading time to pay more attention to, in the stone crusher production line in the appropriate position with a strong magnet for further iron work is also very necessary. In addition, the series of crusher products produced by Shandong Sanxiang Heavy Industry machinery, the hammer crusher should pay special attention to the removal of iron, jaw crusher, impact crusher, hydraulic roller and cone crusher models are relatively not so strict.