How to reduce the wear of stone crusher parts?
In daily production activities, the working environment of the stone crusher is extremely harsh, mainly dealing with the stone, and wear is inevitable. If the production process is properly operated and maintenance can keep up, the service life of the relevant parts of the machine can be extended. In addition to electricity, the costs generated in the daily production process are mainly generated by the wearing parts of the stone crusher such as wear-resistant leakage plate, protection plate, high chromium alloy hammer and so on. So how to reduce the wear of crusher related accessories? Shandong Sanxiang Heavy Industry Company combined with years of experience to give the following suggestions, hope to help you.
First: regular butter to ensure the normal lubricating oil storage of the machine. We all know that the normal operation of all parts of the stone crusher is not without the shadow of lubricating oil, in order to always maintain a relatively healthy state of the machine, we should always pay attention to check the use of machine lubricating oil. Generally, after normal production for a period of time, butter should be properly supplemented in daily maintenance work. When adding emulsified oil to the machine, keep the amount of oil to two-thirds, not too full, too much or too little butter will affect the normal operation of the machine.
Second: Feed to be relatively uniform, do not enter too large material. The jaw crusher produced by the company is mainly used for crushing large materials, relatively speaking, as long as the import of anisol can go into the problem is not big. In theory, the hammer crusher can be broken if it is smaller than the machine mouth, but try not to always enter too much material, controlling the uniform feeding at 60-70 cm is the best, one is to improve its output, and the other is to reduce the wear degree of high chromium alloy hammer, wear-resistant leakage plate and other wearing parts.
Third: pay attention to iron removal work. All the stone crusher is afraid of entering the iron block, especially the larger iron block, the jaw crusher hurts the tooth plate and the elbow plate; Hammer crusher, impact crusher and other models damage hammer head, protection plate, etc.; Abrasion layer of roller surface is damaged by roller grinding sand machine. This inside the hammer crusher is especially afraid of entering the iron block like the shovel teeth, the large fast broken iron missed by the material yard, once it enters, if it is not stopped in time, it is easy to cause a devastating blow to the machine.
Fourth: pay attention to the soil removal work. Now, when many stone factories do environmental dust removal work, they often use spray devices at the machine mouth to reduce the dust density of the production workshop with water. If the soil removal work is not done well, due to its own sticky characteristics in the water, it is easy to cause the machine to clog, the vibrating screen, the linear feeder will also affect the vibration amplitude because of the accumulation of dust, and the screen will reduce the screening efficiency. The normal production process of the crusher will be greatly reduced because the overall work efficiency is not enough to remove the soil, and the wear cost of the machine is increased, so the soil removal is a link that cannot be ignored.
Fifth: Be sure to carry out regular overhaul and maintenance. Machines are like people, if they serve you well, they can help you do more work, otherwise, they will be upset. This requires the worker master to take the relevant responsibility, regularly check the wear of the machine parts, especially the high chromium alloy hammer of the hammer crusher, in the wear of no more than one-third, it is necessary to turn the use of the hammer face, so that it can be used as a new hammer.
Sixth: Be sure to choose the quality of the product accessories. In this regard, when cooperating, try to find a good reputation, strong strength, and good after-sales service crusher manufacturers to cooperate. One of the main reasons to reduce the wear of the crusher is that the overall design of the machine is reasonable, the product is not genuine, and the figure is cheap.
In summary, on how to reduce the wear of stone crushers and accessories, Shandong Sanxiang Heavy Industry Co., Ltd. combined with years of production and use experience, summed up the above six suggestions for your reference. If you have the needs of parts, we as a crusher manufacturer with many years of production experience, excellent quality, welcome to call Shandong Sanxiang Heavy Industry machinery parts sales hotline to order, your support has been our driving force forward.

Remark:Shandong Sanxiang Heavy Industry Co., Ltd. specializes in the crusher industry and has achieved notable accomplishments in both soft and hard rock crushing domains. The factory is a stone crusher manufacturer and sopplier from Shandong province China,with the best stone crusher quality and price for you.We can accept the MOQ order as 1 set,and the delivery time is 15days after we confirm customer order.Beginning with the hammer crusher, they have successfully developed a comprehensive range of crushing machinery and equipment, including hydraulic double roll sand-making machines, rod mill sand-making machines, roller (grinding) sand-making machines, jaw crushers, impact crushers, double roll crushers, strong impact crushers, reversible strong impact crushers, vibrating feeders, circular vibrating screens, low-oil vibrating screens, triple shaft elliptical screens, and hydraulic cone crushers. The company also offers sales of accessories such as high-chromium alloy hammerheads and wear-resistant leakage plates.