Why must the hammer crusher replace the hammer head in time?
High chromium alloy hammer is the most critical one of all parts of the hammer crusher, its quality directly determines the production efficiency of the machine, so many customers increasingly feel that having a reliable hammer is how important a thing. In reality, the crusher hammer used for production is mainly divided into high manganese steel, forging and high chromium alloy hammer, the service life of the first two is about the same, the wear resistance of the latter is 2.5-3 times that of the first two. Good wear resistance means that the price of high chromium alloy hammer is higher, but the overall cost performance is significantly stronger than the hammer of high manganese steel and forging materials.
In actual production, due to the expensive market price of high chromium alloy hammer head, generally wear resistant and diamond wear bald before choosing to change the hammer head, although there is a consideration of saving the replacement cost of parts, but this practice is not proper.
Shandong Sanxiang Heavy Industry machinery production of hammer crusher supporting high chromium alloy hammer head, its weight, hammer hole diameter and hole distance are the results of many years of actual production inspection and various technical demonstration, can not be changed at will. This involves a hanging hammer head to the gap between the gap problem, generally the hammer crusher produced by Shandong Sanxiang Heavy Industry machinery this distance is about 4 cm, the bigger the machine, the distance can be properly amplified, but there is a theoretical value, too large or too small are unreasonable, are not conducive to the production of the machine.
As the title of the article says, why must we replace the hammer of the crusher in time?
First of all: the bald hammer has no use value, it will seriously affect the production efficiency of the machine.
Second: In the actual production process, the machine accessories are not only wearing the hammer head, but also wearing the wear-resistant leakage plate slowly. In this process, the actual distance from the hammer head to the leakage plate will be slowly put. Originally, the hole of your machine is round 80, and the gap between the hammer and the hole is controlled at about 4 cm, and later, with the wear of relevant accessories, this distance may reach 6 cm or even greater. When it reaches a certain extent, the particle size of the broken material will be greater than the diameter of the hole, and the material will not be exposed, resulting in abnormal production activities.
Third: If normal, the customer's use of the site has a spare hammer, it is inevitable that there will be damage to the hammer, although the probability is small, but also have to be prepared. If a certain hammer head on a hammer shaft is damaged, note that when replacing this hammer head, the hammer head that is symmetrical with it has to be replaced regardless of whether it is good or bad, the purpose is to maintain the dynamic balance of the entire rotor.
Fourth: Timely replacement of the crusher hammer, can bring you greater economic benefits. In the actual production process, the hammer crusher will have such a phenomenon, at the beginning of the crusher production efficiency is obviously higher than when the hammer head is about to be replaced, this is because with the hammer head wear degree increases, the overall distance under the hammer head hole is slowly shortening, as long as it does not exceed the maximum theoretical value, it can still be used, but the effect can be reduced.
In summary: Shandong Sanxiang Heavy Industry Co., Ltd. to the company's practical customer advice for the hammer crusher is, although the high chromium alloy hammer head is a little expensive, but also need to be used, can not be overused, otherwise it will be a small loss, more than worth the loss. Next, Shandong Sanxiang Heavy Machinery net continue to increase the research and development of wear-resistant hammer head, strive to come up with better products to return everyone.

Remark:Shandong Sanxiang Heavy Industry Co., Ltd. specializes in the crusher industry and has achieved notable accomplishments in both soft and hard rock crushing domains. The factory is a stone crusher manufacturer and sopplier from Shandong province China,with the best stone crusher quality and price for you.We can accept the MOQ order as 1 set,and the delivery time is 15days after we confirm customer order.Beginning with the hammer crusher, they have successfully developed a comprehensive range of crushing machinery and equipment, including hydraulic double roll sand-making machines, rod mill sand-making machines, roller (grinding) sand-making machines, jaw crushers, impact crushers, double roll crushers, strong impact crushers, reversible strong impact crushers, vibrating feeders, circular vibrating screens, low-oil vibrating screens, triple shaft elliptical screens, and hydraulic cone crushers. The company also offers sales of accessories such as high-chromium alloy hammerheads and wear-resistant leakage plates.