Introduction to the Working Principles of 5 Types of Stone Crushers mills:

To facilitate a unified understanding of the working principles of various crushers produced by our company, today I will briefly summarize them for you, hoping it will be helpful.

Shandong Sanxiang Heavy Industry Co., Ltd. Hammer Crusher mill Working Principle:

The rotor disc of the hammer crusher, which is equipped with hammer heads, rotates at high speed under the drive of the motor. This rotation drives the hammer heads to perform a high-speed circular motion. When materials enter the crushing chamber, they are struck by the high-speed rotating hammer heads. The materials are then crushed through impact, collision with the counterplate, and friction between high-speed flying materials. Materials that meet the particle size requirements are discharged through the specified sieve holes. Materials that do not meet the requirements are crushed again as new materials enter the chamber. When larger materials enter the crushing chamber, retaining bars pre-installed in the upper part prevent damage to other components, ensuring smoother and stable crushing.

Shandong Sanxiang Heavy Industry Co., Ltd. Jaw Crusher mill Working Principle:

The PE series jaw crusher's three-phase asynchronous motor drives the rotor eccentric shaft to rotate at a specified speed through a triangular belt. The suspended movable jaw, supported by the eccentric shaft and the lower shaft plate, moves along a certain trajectory, causing a squeezing and shearing motion relative to the fixed jaw. This motion crushes the material, and materials smaller than the discharge port are expelled due to their own weight. The upper nearly circular motion trajectory of the movable jaw aids in the crushing of large chunks, while the lower elongated elliptical motion trajectory increases output and ensures uniform particle size. The toggle plate protects other components by breaking itself when foreign materials that cannot be crushed enter the crushing chamber.

Shandong Sanxiang Heavy Industry Co., Ltd. Impact Crusher mill Working Principle:

The PF series impact crusher uses impact energy to crush materials. The rotor, driven by the motor, rotates at high speed. Materials entering the feed inlet are struck by the high-speed rotating hammers, and the high-speed impact of the hammers crushes the materials. Crushed materials are then rebounded onto the impact plate for secondary crushing. This process repeats until the materials reach the desired particle size and are discharged from the outlet. Adjusting the gap between the impact plate bracket and the rotor changes the material's exit granularity and shape. The impact crusher includes a spring safety device behind the impact plate; when non-crushable materials enter the crushing chamber, the impact racks move backward, expelling the non-crushable materials.

Shandong Sanxiang Heavy Industry Co., Ltd. Hydraulic Cone Crusher mill Working Principle:

The PG series single-cylinder hydraulic cone crusher consists of six main components: upper frame, lower frame, dynamic cone, eccentric sleeve, transmission part, and hydraulic cylinder. The horizontal shaft, driven by the motor, rotates horizontally, driving the eccentric sleeve to rotate through gears. The eccentric sleeve then drives the dynamic cone to rotate and swing continuously, achieving continuous crushing of rocks. The hydraulic cone crusher is a high-performance device with improvements in spring hydraulic protection and adjustment compared to traditional cone crushers. Hydraulic cylinders control and automate the operation, achieving significant advancements in production control and automation.

Shandong Sanxiang Heavy Industry Co., Ltd. Sand Making Machine Working Principle:

The PSX series fine crushing sand making machine has a rotor with interlocking hammer blocks that rotates at high speed under the drive of the motor. When materials enter the crushing chamber, they are impacted by the high-speed rotating hammer blocks, resulting in crushing through impact and friction between materials and the counterattack plate. Materials meeting the requirements are discharged through the discharge port and rear counterattack plate holes, while large chunks are expelled through the discharge port for further crushing. The machine can adjust the output granularity by adjusting the gap between the hammer blocks and the counterattack plate.

In summary, Shandong Sanxiang Heavy Industry Co., Ltd. is a crusher manufacturer in Shandong, focusing on the crusher industry. Starting with the hammer crusher mill, the company has successively developed a series of crushing machinery, including rod mills, jaw crushers, impact crushers, double-roll crushers, impact crushers, reversible impact crushers, vibrating feeders, circular vibrating screens, hydraulic cone crushers, wood crushers, and other crushing machinery and complete sets of equipment. Spare parts include high-chromium alloy hammer heads, wear-resistant liner plates, etc. In addition to providing customers with assembly lines, the company has also developed auxiliary equipment for sand production, screening, powder selection, transportation, dust prevention, steel structures, and more.